When you purchased your RAZR Synthetic Lite Ice Auger you also received a Brushless Drill Adapter/Extension with the easy view safety flange, a collar bolt and allen wrench. The 16 inch adapter extension designed to be connected directly to your 18v+ brushless drill and 1/2 inch chuck will allow you to easily adjust the drilling height of the auger from 31 to 42 inches.
The stock setup on your RAZR Synthetic Lite will allow you to drill through up to 36 inches of ice, but the Synthetic Lite Ice Augers are better suited for ice that is up to 25 inches. If you are drilling in ice beyond this thickness, you should consider a RAZR Synthetic Ultra which has additional flighting to remove ice shavings and slush from the hole and is better suited for thicker ice.
You Can Connect Your RAZR Synthetic Lite To A Clam Drill Plate
Should you desire a more traditional two handle operation with your RAZR Synthetic Lite you can pair it with the Clam Drill Plate. To connect the size RAZR Synthetic Lite to the drill plate you simply need to purchase a Drill Plate Extension.
Drill Plate Extensions From RAZR
If you want to use drill plate with your RAZR Synthetic Lite Ice Auger you need to replace your stock adapter/extension by purchasing one of our Drill Plate Extensions, available in two different lengths 12 inch and 20 inch. These extensions will allow you to adjust the drilling height and total length of the auger by bolting directly to the drill plate output shaft, and into your RAZR Synthetic Lite. If you are using a drill plate setup, you do not need to use the safety-flange.
Available in 2 different lengths: 12in, 20in
Built from high quality steel, 18mm tube deign with female connection on top and male on terminating end
Each package includes the Drill Plate Extension and a Collar Bolt